The GSC Series of single cartridge metal filter cartridge housings are constructed of 316 stainless steel with a clamp closure to service a wide range of general purpose filter applications.
Key features:
Single shell construction for quick spillfree cartridge replacement
Inline ¾” and 1″ inlet/outlet connections for ease of installation
Drains/Vent built in
Flow rates of up to 7 GPM (26.5 lpm) per 10″ filter cartridge
Housing pressure drop is 0.6 PSID at 7 GPM (40mbar @ 26.5 lpm)
The Graver Technologies HEPAfine® and ULPAfine® line of filtration products are designed to meet the stringent demands of critical environments in commercial, industrial, institutional and residential applications.
Key features:
High-Efficiency Filtration – HEPAfine® and ULPAfine® filters are designed to meet the stringent filtration requirements of critical environments, removing particles as small as 0.1-0.3µ, ensuring superior air quality in industries like pharmaceuticals, biotechnology, and electronics.
Customizable Flow and Efficiency – These filters are designed with flexibility in mind, allowing adjustments in pleat pitch, pleat height, and media type to meet specific flow resistance and efficiency requirements, making them suitable for a wide range of applications.
Durable and Robust Construction – Built with extruded aluminum frames and bonded pleat packs, HEPAfine® and ULPAfine® filters offer leak-free joints and enhanced durability, reducing the risk of air bypass and ensuring long-lasting performance.
Advanced Media Technology – Graver Technologies uses high-performance media, including nano-fiber technology, composite media, and borosilicate microfibers, which provide superior filtration efficiency while minimizing extractables for critical applications.
Graver High Flow Series filters feature a larger geometry to handle higher flows with fewer filter elements. The result is much faster, easier filter changeouts.
Key features:
6″ diameter, large geometry for high flow rates
Absolute retention ratings from 1 to 100 microns
Capable of flow rates up to 500 GPM in a single 60″ element
Inside-out flow retains contaminant even during changeout
Multi layer pleated construction with optimized surface area
Outer cage prevents media extrusion problem experienced with some competitive offerings
Unique Quad Seal gasket provides maximum seal integrity
Graver High Flow RF Series filter housings are designed to accept Graver’s and competitive High Flow RF Series large geometry filter elements. Available in both vertical and horizontal orientations, the High Flow RF housings are available in designs to accommodate from 1 to 15 filter elements, from 10″ to 60″ long. Constructed of 304 or 319 stainless steel, standard design is rated for 150 PSIG (10.3 bar) with higher pressure design available upon request.
Key features:
Industrial grade housings available in 304L and 316L Stainless Steel wetted parts
Designs for 1, 3, 4, 7, 10, 12, 15, filters per housing
Single Round -Segment Screw hold down clamps; Multi-round -swing bolt hold down clamps
150 psig design
Accepts 10″, 20″, 40″ and 60″ High Flow RF cartridges
Vertical and horizonal designs available
Vent and drain standard
Hold Down plate prevents elements from unseating due to back pressure
The High Flow Series filters handle high flows with fewer elements and offer excellent dirt holding capacity. Smaller systems are possible, reducing upfront costs.
Key features:
6″ diameter, large geometry for high flow rates
Absolute retention ratings from 1 to 100 microns
Capable of flow rates up to 500 GPM in a single 60″ element
Insideout flow retains contaminant even during changeout
Multi layer pleated construction with optimized surface area
Outer cage prevents media extrusion problem experienced with some competitive offerings
Unique Quad Seal gasket provides maximum seal integrity
The LGS Series filters offer a high efficiency coalescing style element. Each model employs one or more replaceable element cartridges which provide positive gasket sealing.
An economical, nominally rated disposable filter element constructed of 100% polypropylene media for chemical compatibility with a variety of process fluids.
Key features:
Available in nominal ratings from 1 to 75 microns
Molded core for excellent collapse strength
Graded pore construction for long onstream life
Melt blown media resists dirt unloading as differential pressure increases
